Futronic FS83 serial Fingerprint Authentication Module (sFAM), available at AvidBiometrics.com, combines both high performance fingerprint scanner and recognition engine into one device. It has internal memory that can store up to 2500 fingerprint templates.
Any host system can control the FS83 via standard 4 wires serial interface to enroll finger and recognize finger. The recognition result will be sent from FS83 to the host. It can be used to add fingerprint recognition function to existing products such as access control device, point of sales machine, electronic safe, etc.
Fingerprint images and templates can be transferred between FS83 and host system for making flexible application. Futronic provides development tools to customer free of charge for integrating the FS83 with host system.
Fingerprint scanning window size is 16x24mm
Image resolution is 480x320 pixel, 500 DPI
Raw fingerprint image file size is 150K byte
Light source: Infrared LED
Fingerprint recognition engine
Processor: Analog Device ADSP-BF532
16MB SDRAM and 16MB Flash memory
Can store up the 2500 fingerprint templates
With Futronic proprietary software and fingerprint recognition algorithm
Fingerprint recognition accuracy: FAR-10-6, FRR-10-2
Fingerprint template format same as all other Futronic products
4 wires serial interface, VCC, GND, TX and RX. Speed up to 961200bps.
Supply voltage: 5V. Max current consumption: 200mA
ESD: contact 8KV and air discharge 16KV no permanent damage
Weight: 200 grams
Size: 80mm(L) x 80mm(W) x 40mm(H)
Operation temperature: -20 to +55 Degree Ce